Solution: For electric models, check the heating elements and replace if damaged. For gas, inspect the igniter or pilot light. Ensure power/gas supply is on and functioning.

Solution: Test the oven temperature sensor and recalibrate if needed. Replace a faulty thermostat or sensor. Use an oven thermometer to verify accuracy.

Solution: Clean burner ports and igniter. Check for debris or spills. Replace the igniter if it’s not sparking. Ensure gas supply is open and lines are clear.

Solution: Inspect and clean the door gasket. Replace if cracked or worn. Adjust or replace door hinges if misaligned.

Solution: Replace the bulb. If it still doesn’t work, check the socket, wiring, or door switch and replace as needed.

Solution: Allow the oven to cool and reset power. Inspect hinges, springs, and latch for damage; replace if necessary.

Solution: Remove excess grease before starting the cycle. Ensure the door is locked. Inspect heating elements and replace if damaged.

Solution: Check for tripped breakers or blown fuses. Ensure the child lock is off. Inspect the control board and replace if faulty.

Solution: Turn off the appliance and ventilate the area. Check connections for leaks. If odor persists, call a professional immediately.

Solution: Identify the source. Tighten loose racks or panels. Replace noisy fans or damaged components.

Solution: Reset the appliance by unplugging it for several minutes. If unresponsive, replace the control board or touchpad.

Solution: Check for faulty heating elements or convection fan. Rearrange racks and avoid overcrowding. Replace damaged parts as needed.

Solution: Inspect for electrical shorts or faulty wiring. Replace damaged cords and consult an electrician if needed.

Solution: Clean out food debris and grease. If smoke persists, check for faulty heating elements or wiring.

Solution: Clean burners and check for blockages. Replace damaged burner heads or elements.

Solution: Replace the door glass. Ensure proper installation to prevent future issues.

Solution: Reset the timer or clock. Replace the control board if the issue persists.

Solution: Ensure the door is fully closed and locked. Check the self-clean latch and control board. Replace if faulty.

Solution: Refer to your manual for code meanings. Error codes often indicate sensor or control board issues. Address the specific problem or consult a technician.

Solution: For gas smells, turn off the appliance and ventilate. For burning smells, clean thoroughly and check wiring. If odors persist, contact a professional immediately.