What does W10435302 include?

High-quality upper/lower bearings and a tub seal designed to keep water out of the bearings and ensure smooth, quiet spin.

Do I really need the W10447783 tool?

Yes, the installer tool ensures correct alignment and seating of the bearings to avoid premature failure or noise. It’s the recommended method for this repair.

Which washers is this for?

Whirlpool Cabrio and Maytag Bravos XL top-load washers, plus many Whirlpool-built models under KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore. Confirm fit by your exact model number.

W10435302 Washer Bearing & Tub Seal Kit + W10447783 Installation Tool

Name: W10435302 Washer Bearing & Tub Seal Kit + W10447783 Installation Tool
Brand: Whirlpool
SKU: W10435302+W10447783
Rating: 4.8 (250 reviews)

Silence the roaring spin, stop leaks, and restore smooth performance on Whirlpool Cabrio and Maytag Bravos XL washers. This page covers what’s included, symptoms, causes, compatibility, and how to install—plus a full video guide.

BUY THE KIT + TOOL

*Best to enter your washer’s exact model # in the search box above for perfect fit

Disclaimer: Info is summarized from manufacturer sources and common repair practice. Always unplug the washer, shut off water, and verify fit by your exact model number. PartsDiscount.com is not affiliated with Whirlpool.

What the Bearing & Tub Seal Kit (W10435302) Does

The W10435302 Bearing and Tub Seal Kit includes high-quality upper/lower bearings and a tub seal to keep water out of the bearings. Bearings allow the tub to spin freely and quietly; the seal protects those bearings from water and detergents to prevent corrosion and early failure.

Common Causes of Failure

Water infiltration past a worn seal causing bearing rust and grinding
Heavy or unbalanced loads stressing the bearing surfaces
Age-related wear and detergent/chemical exposure

Symptoms You’ll Notice

Loud roaring/rumbling during spin
Leaks from the bottom/center of the washer
Tub struggles to spin or doesn’t spin smoothly

Cross-refs for W10435302: AP5325033, 2118925, AH3503261, EA3503261, PS3503261.

Why the Installation Tool (W10447783) Matters

The W10447783 Bearing Installer Tool is engineered to seat the bearings and seal square and true. Proper alignment prevents wobble, noise, and premature failure. It’s strongly recommended for this repair.

When Bearings Are Bad

Grinding in spin, harsh vibration
Water leaking from tub area
Drum doesn’t spin smoothly when turned by hand

Cross-refs for W10447783: AP5325072, 2119011, AH3503307, EA3503307, PS3503307, W10435274, W10435285, W10447782.

Compatible Platforms

Designed for Whirlpool Cabrio and Maytag Bravos XL top-load washers and other Whirlpool-built units. Also seen on select KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Always match by your exact model number.

Check kit & tool availability

Install Overview (Skill Level: Intermediate)

Unplug washer and turn off hot/cold water. Remove console/top and inner basket per model.
Press out old bearings/seal; clean bearing bores and shaft thoroughly.
Using W10447783, drive in new lower & upper bearings and tub seal squarely.
Reinstall basket/rotor/stator (if equipped), reconnect hoses & wiring, and reassemble top/console.
Run diagnostics or a spin test; check for leaks and smooth operation.

Tip: A light film of correct lubricant on the seal lip helps initial run-in. Avoid hammering bearings without the installer.

Install Video — Bearings & Seal with Installer Tool

Video is for general guidance—model variations exist. Match parts to your exact model.

Troubleshooting Quick Guide

Symptom	Likely Cause	What to Check
Roaring/rumble in spin	Failed bearings	Spin basket by hand; listen/feel for roughness. Inspect seal for water trace.
Leak under center	Seal failure	Look for rust tracks; seal lip damage; shaft wear.
Won’t reach high spin	Drag from failed bearings	Bearing temperature after spin; motor amp draw; rotor/stator interference (if present).
New install still noisy	Mis-seated bearing	Re-seat with W10447783; ensure bores are clean and bearing sits fully home.

Shop the Kit + Tool

BUY W10435302 + W10447783

Use coupon DISCOUNT. FREE & Fast U.S. Shipping. No Restocking Fees.

Cross-Reference Numbers

Part	Replaces / Cross-Refs
W10435302 Bearing & Tub Seal Kit	AP5325033, 2118925, AH3503261, EA3503261, PS3503261
W10447783 Installer Tool	AP5325072, 2119011, AH3503307, EA3503307, PS3503307, W10435274, W10435285, W10447782

FAQs

Do I need both the kit and the tool?

Yes—replacing bearings without the installer often leads to noise or early failure. The tool ensures correct seating and alignment.

How long does the repair take?

Plan for 1.5–3 hours depending on experience and model.

Will this fit my model?

Enter your exact model number in the search box above to confirm. This set commonly fits Whirlpool Cabrio and Maytag Bravos XL platforms.

Compatible Whirlpool & Maytag Washer Models

This W10435302 Washer Bearing & Tub Seal Kit with W10447783 Installation Tool fits over 100 Whirlpool Cabrio and Maytag Bravos XL top-load washer models. Click any model number below to search PartsDiscount.com for all compatible parts. *Tip: always enter your full model # in quotes for exact match.

11028081700 11028062800 11027062600 11027062601 11027062602 11027062603 11027062604 11028032700 11028042700 11028082700 11028092700 MVWB850YW1 MVWB850YW0 MVWB850WB2 MVWB750WB0 MVWB750WR1 WTW6600SW2 WTW6600SB1 WTW6600SG3 WTW7800XW0 WTW8800YW0 WTW8800YC0 WTW7300XW1 WTW6300SW0 WTW6700TW2 WTW7800XL1 WTW8500BW0 WTW8240YW0 WTW6200SW1 WTW8600YW1 WTW6200VW0 MTW6600TB1 MTW6500TQ0 MTW6700TQ0 MVWB980BW0 MVWB955YW0 MVWB855WB2 MVWB850YG0 MVWB800VB0 MVWB700BW0 MVWB450WQ0 MVWB400VQ0

Note: For best results, type your full model number in quotes (e.g., "WTW6600SW2") in the search box. This ensures precise compatibility when ordering the W10435302 + W10447783 kit.